This tutorial explains Linux “netstat” command, options and its usage with examples.
DESCRIPTION
netstat (network statistics) is a command line tool for monitoring network connections both incoming and outgoing as well as viewing routing tables, interface statistics etc. netstat is available on all Unix-like Operating Systems and also available on Windows OS as well. It is very useful in terms of network troubleshooting and performance measurement. netstat is one of the most basic network service debugging tools, telling you what ports are open and whether any programs are listening on ports.
SYNOPSIS
netstat [-a] [-n] [-v]
netstat [-g | -m | -p | -s | -f address_family ] [-n] [-P protocol]
netstat [ -i ] [ -I interface ] [ interval ]
netstat -r [-a] [-n] [-v ]
netstat -M [-n] [-s ]
netstat -D [ -I interface ]
OPTIONS :
-a
Show the state of all sockets and all routing table entries; normally, sockets used by server processes are not shown and only interface, host, network, and default routes are shown.
-n
Show network addresses as numbers. netstat normally displays addresses as symbols. This option may be used with any of the display formats.
-v
Verbose. Show additional information for the sockets and the routing table.
-g
Show the multicast group memberships for all interfaces.
-m
Show the STREAMS statistics.
-p
Show the address resolution (ARP) tables.
-s
Show per-protocol statistics. When used with the -M option, show multicast routing statistics instead.
-i
Show the state of the interfaces that are used for TCP/IP traffic.
-r
Show the routing tables.
-M
Show the multicast routing tables. When used with the -s option, show multicast routing statistics instead.
-d
Show the state of all interfaces that are under Dynamic Host Configuration Protocol (DHCP) control.
-D
Show the status of DHCP configured interfaces.
-f address_family
imit statistics or address control block reports to those of the specified address_family, which can be one of:
inet For the AF_INET address family
unix For the AF_Unix address family
-P protocol
Limit display of statistics or state of all sockets to those applicable to protocol.
– I interface
Show the state of a particular interface. interface can be any valid interface such as ie0 or
le0.
EXAMPLES
1. Listing Various Listening Ports
Listing all the LISTENING Ports of TCP and UDP connections
# netstat -a | more Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 *:sunrpc *:* LISTEN tcp 0 52 192.168.0.2:ssh 192.168.0.1:egs ESTABLISHED tcp 1 0 192.168.0.2:59292 www.gov.com:http CLOSE_WAIT tcp 0 0 localhost:smtp *:* LISTEN tcp 0 0 *:59482 *:* LISTEN udp 0 0 *:35036 *:* udp 0 0 *:npmp-local *:* Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 16972 /tmp/orbit-root/linc-76b-0-6fa08790553d6 unix 2 [ ACC ] STREAM LISTENING 17149 /tmp/orbit-root/linc-794-0-7058d584166d2 unix 2 [ ACC ] STREAM LISTENING 17161 /tmp/orbit-root/linc-792-0-546fe905321cc unix 2 [ ACC ] STREAM LISTENING 15938 /tmp/orbit-root/linc-74b-0-415135cb6aeab
Listing TCP Ports connections
# netstat -at Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 *:ssh *:* LISTEN tcp 0 0 localhost:ipp *:* LISTEN tcp 0 0 localhost:smtp *:* LISTEN tcp 0 52 192.168.0.2:ssh 192.168.0.1:egs ESTABLISHED tcp 1 0 192.168.0.2:59292 www.gov.com:http CLOSE_WAIT
Listing UDP Ports connections
# netstat -au Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State udp 0 0 *:35036 *:* udp 0 0 *:npmp-local *:* udp 0 0 *:mdns *:*
2. Listing various Listening connections
Listing all LISTENING Connections
# netstat -l Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 *:sunrpc *:* LISTEN tcp 0 0 *:58642 *:* LISTEN tcp 0 0 *:ssh *:* LISTEN udp 0 0 *:35036 *:* udp 0 0 *:npmp-local *:* Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 16972 /tmp/orbit-root/linc-76b-0-6fa08790553d6 unix 2 [ ACC ] STREAM LISTENING 17149 /tmp/orbit-root/linc-794-0-7058d584166d2 unix 2 [ ACC ] STREAM LISTENING 17161 /tmp/orbit-root/linc-792-0-546fe905321cc unix 2 [ ACC ] STREAM LISTENING 15938 /tmp/orbit-root/linc-74b-0-415135cb6aeab
Listing all TCP Listening Ports
Listing all active listening TCP ports by using option netstat -lt.
# netstat -lt Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 *:dctp *:* LISTEN tcp 0 0 *:mysql *:* LISTEN tcp 0 0 *:sunrpc *:* LISTEN tcp 0 0 *:munin *:* LISTEN tcp 0 0 *:ftp *:* LISTEN tcp 0 0 localhost.localdomain:ipp *:* LISTEN tcp 0 0 localhost.localdomain:smtp *:* LISTEN tcp 0 0 *:http *:* LISTEN tcp 0 0 *:ssh *:* LISTEN tcp 0 0 *:https *:* LISTEN
Listing all UDP Listening Ports
Listing all active listening UDP ports by using option netstat -lu.
# netstat -lu Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State udp 0 0 *:39578 *:* udp 0 0 *:meregister *:* udp 0 0 *:vpps-qua *:* udp 0 0 *:openvpn *:* udp 0 0 *:mdns *:* udp 0 0 *:sunrpc *:* udp 0 0 *:ipp *:* udp 0 0 *:60222 *:* udp 0 0 *:mdns *:*
3. Showing Statistics by Different Protocols
Showing statistics of all protocols
# netstat -s Ip: 2461 total packets received 0 forwarded 0 incoming packets discarded 2431 incoming packets delivered 2049 requests sent out Icmp: 0 ICMP messages received 0 input ICMP message failed. ICMP input histogram: 1 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 1 Tcp: 159 active connections openings 1 passive connection openings 4 failed connection attempts 0 connection resets received 1 connections established 2191 segments received 1745 segments send out 24 segments retransmited 0 bad segments received. 4 resets sent Udp: 243 packets received 1 packets to unknown port received. 0 packet receive errors 281 packets sent
Showing Statistics by TCP Protocol
# netstat -st Tcp: 2805201 active connections openings 1597466 passive connection openings 1522484 failed connection attempts 37806 connection resets received 1 connections established 57718706 segments received 64280042 segments send out 3135688 segments retransmited 74 bad segments received. 17580 resets sent
Showing Statistics by UDP Protocol
# netstat -su Udp: 1774823 packets received 901848 packets to unknown port received. 0 packet receive errors 2968722 packets sent
4. Displaying Service name with PID
# netstat -tp Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 192.168.0.2:ssh 192.168.0.1:egs ESTABLISHED 2179/sshd tcp 1 0 192.168.0.2:59292 www.gov.com:http CLOSE_WAIT 1939/clock-applet
5. Display Kernel IP routing table
# netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 link-local * 255.255.0.0 U 0 0 0 eth0 default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
6. Showing network interface packet transactions
# netstat -i Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth0 1500 0 4459 0 0 0 4057 0 0 0 BMRU lo 16436 0 8 0 0 0 8 0 0 0 LRU
7. Showing Kernel interface table, similar to ifconfig command.
# netstat -ie Kernel Interface table eth0 Link encap:Ethernet HWaddr 00:0C:29:B4:DA:21 inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:feb4:da21/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4486 errors:0 dropped:0 overruns:0 frame:0 TX packets:4077 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2720253 (2.5 MiB) TX bytes:1161745 (1.1 MiB) Interrupt:18 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 b) TX bytes:480 (480.0 b)
8. Print Netstat Information Continuously
# netstat -c Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 tecmint.com:http sg2nlhg007.shr.prod.s:36944 TIME_WAIT tcp 0 0 tecmint.com:http sg2nlhg010.shr.prod.s:42110 TIME_WAIT tcp 0 132 tecmint.com:ssh 115.113.134.3.static-:64662 ESTABLISHED tcp 0 0 tecmint.com:http crawl-66-249-71-240.g:41166 TIME_WAIT tcp 0 0 localhost.localdomain:54823 localhost.localdomain:smtp TIME_WAIT tcp 0 0 localhost.localdomain:54822 localhost.localdomain:smtp TIME_WAIT tcp 0 0 tecmint.com:http sg2nlhg010.shr.prod.s:42091 TIME_WAIT tcp 0 0 tecmint.com:http sg2nlhg007.shr.prod.s:36998 TIME_WAIT
9. Finding Listening Programs
# netstat -ap | grep http tcp 0 0 *:http *:* LISTEN 9056/httpd tcp 0 0 *:https *:* LISTEN 9056/httpd tcp 0 0 tecmint.com:http sg2nlhg008.shr.prod.s:35248 TIME_WAIT - tcp 0 0 tecmint.com:http sg2nlhg007.shr.prod.s:57783 TIME_WAIT - tcp 0 0 tecmint.com:http sg2nlhg007.shr.prod.s:57769 TIME_WAIT - tcp 0 0 tecmint.com:http sg2nlhg008.shr.prod.s:35270 TIME_WAIT - tcp 0 0 tecmint.com:http sg2nlhg009.shr.prod.s:41637 TIME_WAIT - tcp 0 0 tecmint.com:http sg2nlhg009.shr.prod.s:41614 TIME_WAIT - unix 2 [ ] STREAM CONNECTED 88586726 10394/httpd
10. Displaying RAW Network Statistics
# netstat --statistics --raw Ip: 62175683 total packets received 52970 with invalid addresses 0 forwarded Icmp: 875519 ICMP messages received destination unreachable: 901671 echo request: 8 echo replies: 16253 IcmpMsg: InType0: 83 IpExt: InMcastPkts: 117